Product Description

1431-CPS-EAB Sargent 1431 Series Powerglide Door Closer with CPS - Heavy Duty Parallel Arm with Compression Stop in Brass Powder Coat Finish

The Sargent 1431-CPS-EAB Surface mounted door closers are designed for interior and exterior doors with quality and flexibility to meet virtually every application. This 1431 closer provides flexibility to match nearly any commercial or industrial application. The spring size is adjustable to fit any application. The 1431 Series door closers are certified to the ANSI/BHMA A156.4 Grade 1 requirements.

Parallel Arm Applications - The 1431 closer is mounted on the push side of the door with the arm under the frame parallel to the face of the door. This application is well suited for narrow face frames and deep reveal applications. The closer arm does not project into the room, and the door can be swung open much farther than in Top Jamb Application.

Features and Benefits:

• Brass Powder Coat finish
• Exceeds 25 million cycles
• Handing: Non handed
• Full rack and pinion construction
• 1-1/2" diameter piston for superior door control
• Self sticking templates supplied for most applications
• UL/cUL listed for use on fire rated doors
• Closing speed, latching speed and backcheck shall be controlled by key operated valves
• CPS - Heavy duty parallel arm with compression stop
• Forged steel arm 11-1/4" (286mm) long
• Provides built in compression stop from 85° - 105°
• Dead stop within 3°
• Permits 105° opening maximum
• High impact non-corrosive plastic covers with two machine screws standard
• Adjustable spring power allows 1431 closers a size range of 1 through 6
• Fasteners: Machine screws and self tapping screws provided for closer and arm