Product Description
281-PH10-EN-LH Sargent 281 Series Powerglide Cast Iron Door Closer with Heavy Duty Friction Hold Open Parallel Arm in Aluminum Powder Coat Finish
The Sargent 281-PH10-EN-LH heavy duty door closers are designed for interior and exterior doors with quality and flexibility to meet virtually every application. All 281 Series closers are equipped with fluid that allows the units to operate effectively in extreme temperatures without readjustment. The spring size is adjustable to fit any application. The 281 Series door closers are certified to the ANSI/BHMA A156.4 Grade 1 requirements.
Parallel arm application - The 281 closer is mounted on the push side of the door. As the door opens, the closer swings with the door and gives full headroom in the door opening. Other advantages are that the closer arm does not project into the room, the frame can be quite narrow and the door can be swung open much further than in Top Jamb Applications. However, the closing force is not as great.
Features and Benefits:
- Aluminum Powder Coat finish
- Exceeds 25 million cycles
- Handing: Left handed
- Full rack and pinion construction
- 1-1/2" diameter piston for superior door control
- Self sticking templates supplied for most applications
- Heavy duty mounting bracket for easy installation of full size iron closer
- Closing speed, latching speed and backcheck shall be controlled by key operated valves
- PH10 - Heavy Duty Friction Hold Open Parallel Arm
- Equipped with adjustable friction holder
- Adjustable hold open from 75° - 180°
- Forged steel arm, 11-1/4" (286mm) long
- Use friction hold open arms for doors subject to moderate hold open use
- High impact non-corrosive plastic covers standard
- Cover secured by machine screws
- Fasteners: Machine screws and self tapping screws provided for closer and arm
