Product Description

7160-519-313 Adams Rite Electric Strike 24VDC Monitored Fail Secure with faceplates in Dark Bronze Anodized Finish

The 7160 series Electric Strike with 4-7/8" faceplates are specifically designed for mortise or cylindrical type locksets with up to 3/4" latchbolt projection without deadbolt. It provides remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4" latchbolt projection without deadbolt. Here, the electrical actuation unlocks strike jaw and thus releasing latchbolt so that the door can be opened without operating latch itself. The Adams Rite 7160 series' extremely compact mechanism very smoothly fits into aluminum jamb (or opposing door) sections as shallow as 1-7/8". It easily fits existing prep for discontinued Adams Rite 7560, 7860 series electric strikes.

It is recommended for use in aluminum jambs

Benefits and Features:

• Dark Bronze Anodized Finish
• Aluminum construction
• Grade 1 strength
• 24V DC Continuous or Intermittent voltage operation
• Current Draw/Amps for 24V operation:
  • AC Intermittent - 0.74A - 'buzz' on operation
  • DC Continuous - 0.17A (silent)
• Stainless Steel Split-Jaw is included with 3/4 x 1-7/16 x 5/8" deep strike opening
• Available in Zinc-aluminum alloy case size of approximately 1" x 3-3/8" x 1-7/8" deep
• Provides electrical remote control, allowing door to open without depressing the panic hardware cross bar
• UL 1034 burglary-resistant listed hardware
• Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
• Fail Secure as standard
• Flat faceplate 1-1/4" x 4-7/8" with radiused corners is included as always
• Fail Secure feature - require power to be applied to unlock the strike lip which is locked on loss of power
3 year limited manufacturer's warranty is included

Individually boxed including mounting screws, mounting clips and adhesive shims to accommodate jamb extrusion thickness greater or less than nominal 1/8 inch