Product Description
7440-M-606 Adams Rite UltraLine Electric Strike with faceplates in Satin Brass Finish
The 7440 series Electric Strike with 4-7/8" faceplates are specifically designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. It provides remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt projection. It functions in such a way that electrical actuation unlocks strike jaw and thus releasing latchbolt so that the door can be opened without operating latch itself. The Adams Rite 7440 series' extremely compact mechanism very smoothly fits into jamb sections as shallow as 1-1/16". It is a direct upgrade for Adams Rite 7140 series electric strikes. The electric strike opens electrically under 35 lbs. of preload.
Recommended for use in hollow metal or wood door jambs and steel or wood doors
Benefits and Features:
- Satin Brass Finish
- Aluminum construction
- Opens under 35lbs of pre-load
- Grade 1 strength
- The Adams Rite 7440 can operate in either Fail Secure or Fail Safe modes easily and can run on 12 or 24 volts in DC or AC mode
- Stainless Steel Split-Jaw is included with 5/8" adjustable x 1-7/16" x 1/2" deep strike opening
- Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-1/16 deep
- Perfect solution for storefront doors with Adams Rite hardware
- UL 1034 burglary-resistant listed hardware
- For use in hollow metal or wood door jambs and steel or wood doors
- Non handed features of this electric strike features an ultra-compact design
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
- Flat faceplate with square corners 1-1/4" x 4-7/8" is included as always
- 3 year limited manufacturer's warranty is included
Individually boxed including mounting screws, mounting clips and adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8", an adjustable jaw shim pack and two plug-in voltage adapters for 12/16/24 VAC and 12/24 VDC.